Condensate Drain Valves
Kingston Condensate Drain Products are designed to provide efficient drainage of condensate from compressor tanks. The product line offers a mechanical valve to be used on compressors with an unloader port and an electric timer drain valve that can be used on all compressors.
The Kingston Timer Drain Valve is an effective and reliable way to remove condensate from your system. It eliminates the need to manually drain while improving efficiency and avoiding wasted compressed air. The KTD was engineered and designed for ease of use and an easy installation.
KTD-B
KTD-B-02 (1/4")
KTD-B-04 (1/2")
The KTD-B-02 and KTD-B-04 are Kingston’s Standard Automatic Timer Drain Valve. These valves can be used on any compressor. They include a DIN connector with strain relief, and a 6’ cord with ground plug.
Electric
1/4″, 1/2″
1 – 300 PSI
-40°F to -140°F
No Strainer
Brass
KTD-S-B-24
1/4" NPTM
1/2" NPTF
The KTD-S-B-24 is similar to Kingston’s KTD-B, but this model includes a strainer to prevent debris from entering the valve. A ball valve is also incorporated for maintenance purposes. Includes 6’ cord with ground plug.
Electric
1/4″ NPTF, 1/2″ NPTM
30 – 300 PSI
-40°F to -140°F
Integral Strainer
Brass
KTD-S
KTD-S-02 (1/4")
KTD-S-04 (1/2")
The KTD-Strainer is an accessory for the KTD-B Timer Drain Valve. This additional option provides an extra layer of protection. This mesh strainer prevents large particles and debris from entering or blocking the valve.
Electric
1/4″, 1/2″
1 – 300 PSI
-40°F to -140°F
Stand Alone Strainer
Brass
Kingston Model 620 Automatic Drain Valve automatically removes the condensates that collect in the tank, thereby extending the life of the air receiver and downstream air equipment. It is designed for use on all compressors with an unloader port. Complete drainage is assured by double action of the valve, which opens when the compressor starts and stops. Kingston Model 620 Automatic Drain Valve offers long, trouble-free service provided through simplicity of design and the use of corrosion resisting materials. A minimum pressure of 30 PSI is required to permit this valve to function properly. Maximum operating pressure 300 PSI. Use of a Kingston Ball Valve (KBV/KMBV) is recommended on air compressors with 5 horsepower or less.
Pneumatic
3/8″
30 – 300 PSI
-40°F to 225°F
Brass